A head harness should adjust to the shape of your head. That takes more than changing the length of the straps: their direction and the position of their connectors also determine the fit. This is where our new Headgear comes in – with specially designed connector discs, easy-care BioThane® straps and straightforward gag changes.
Small pucks, plenty of possibilities
Instead of conventional rings, the Headgear uses round connector discs that we call “pucks”. They guide the straps precisely: depending on their position, the straps can slide through a guide or pivot around their attachment point. This lets you coordinate the strap layout across the forehead, cheeks and back of the head.
You adjust more than just the tightness. You also choose where the connectors sit and the angles of the straps – for a tailored fit and a close-fitting, restrictive hold.
Four connectors, different roles
The illustrations show the available movements: cyan indicates sliding, and orange indicates pivoting.
At the cheek

Two continuous straps cross here. Both can slide, and the vertical strap can also pivot. This lets you adjust the position of the puck on your cheek and the angle of the strap.
At the forehead

The three straps are secured with screws and pivot around their attachment points without sliding lengthways there. This helps you align their path over your head. The puck belongs on the forehead above the bridge of the nose to avoid uncomfortable pressure in that area.
At the back of the head

The centre strap can slide up and down, while the two side straps pivot independently. An additional screw hole is provided in case the puck slips during use: after punching a suitable hole, the centre strap can be secured in the desired position.
At the end connector

The upper strap is secured with a screw, while the horizontal strap runs through a straight guide. Sliding lets you position the upper attachment point. The lower slot remains available as a spare.
Change the gag without undoing screws
The gag threads directly onto the main strap. To change it, there is no need to loosen screws or dismantle ring attachments. You can unthread the gag from the unfastened strap and thread on a compatible model.
BioThane®: durable and easy to clean
We use BioThane®, a plastic-coated webbing, for the straps. It is waterproof and can usually be cleaned with warm water and soap. Compared with leather, it requires less maintenance and is easier to keep clean, making regular cleaning straightforward.
Standard or lockable
The Headgear comes in two versions: Standard at €139 and Lockable at €159, both without a gag. The lockable version uses suitable metal buckles and specially made elongated holes. Both versions are offered in Black, Neon Yellow and Neon Orange.
The pucks are made in Germany. The straps are also cut and punched here, and the finished Headgear is assembled here.
Explore the Headgear, fitting instructions and all adjustment options