{"product_id":"headgear","title":"Headgear","description":"\u003cdiv style=\"clear: both;\"\u003e\n\u003ch2\u003eHeadgear – a tailored fit, a firm hold\u003c\/h2\u003e\n\u003cp\u003eA head harness you can adjust to suit the shape of your head: the Headgear uses specially designed connector discs instead of conventional rings. Depending on the connector, the straps can slide or pivot. This lets you adjust not only the fit, but also the position of the connectors and the path of each strap – for a close-fitting, restrictive hold.\u003c\/p\u003e\n\u003cp\u003eChanging the gag is straightforward, too: it threads directly onto the main strap and can be swapped for a compatible model. There is no need to loosen screws or dismantle any ring attachments.\u003c\/p\u003e\n\u003cp\u003eThe BioThane® straps combine durability with easy care. The coated webbing is waterproof and can usually be cleaned with warm water and soap. Compared with leather, it requires less maintenance and is easier to keep clean – a practical advantage for regular, hygienic cleaning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"clear: both;\"\u003e\n\u003ch2\u003eHow to put it on\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0659\/5339\/9020\/files\/Riemenschema_3000x3000_20c41659-1b67-4cec-99b9-806e1f66c665.png?v=1794823640\" alt=\"Headgear strap diagram identifying the coloured straps and pucks.\" width=\"200\" height=\"200\" loading=\"lazy\" style=\"float: right; width: 200px; max-width: 100%; height: auto; margin: 0 0 12px 16px;\"\u003e\n\u003cp\u003eThe round strap connectors are referred to as “pucks” in these instructions. The colours help you identify the individual straps and pucks.\u003c\/p\u003e\n\u003ch3\u003e1. Prepare the main strap\u003c\/h3\u003e\n\u003cp\u003eFirst thread the black main strap through the orange puck and then the green puck. Next, thread on the gag, followed by the blue puck and the pink puck.\u003c\/p\u003e\n\u003ch3\u003e2. Connect the main strap to the headpiece\u003c\/h3\u003e\n\u003cp\u003eThread the free end of the black main strap through the purple puck on the headpiece. The headpiece and main strap are now connected. Leave the main strap unfastened for now.\u003c\/p\u003e\n\u003ch3\u003e3. Insert the gag and fasten the main strap\u003c\/h3\u003e\n\u003cp\u003eInsert the gag. Hold the red puck against your forehead and lay the cyan strap towards the back for now. Fasten the black main strap loosely.\u003c\/p\u003e\n\u003ch3\u003e4. Position the crown strap\u003c\/h3\u003e\n\u003cp\u003eBring the cyan strap from the back of your head over the crown to your forehead, and position the red puck on your forehead. It should sit above the bridge of your nose without pressing on it.\u003c\/p\u003e\n\u003ch3\u003e5. Thread the orange chin strap\u003c\/h3\u003e\n\u003cp\u003ePass the orange strap through the blue puck, underneath your chin and then back up through the orange puck. Thread it into the orange buckle and fasten it loosely for now.\u003c\/p\u003e\n\u003ch3\u003e6. Thread the pink chin strap\u003c\/h3\u003e\n\u003cp\u003eRepeat on the opposite side with the pink strap: pass it through the green puck, underneath your chin and then up through the pink puck on the other side to the pink buckle. Fasten this loosely as well.\u003c\/p\u003e\n\u003ch3\u003e7. Adjust the fit\u003c\/h3\u003e\n\u003cp\u003eOnce all straps are loosely connected, slide the pucks into the desired positions and align the pivoting straps. Make sure the straps lie flat without twisting.\u003c\/p\u003e\n\u003cp\u003eThen tighten the straps gradually using the buckles. Keep checking the positions of the pucks and the fit of the whole Headgear. The forehead connector should remain above the bridge of your nose, with no uncomfortable pressure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eAdjust the fit with the pucks\u003c\/h2\u003e\n\u003cp\u003eThe straps and connector discs let you adapt the head harness to different head shapes. The discs, also called “pucks”, guide the straps and determine where they can slide or pivot. This lets you coordinate the positions of the connectors with the path of the straps.\u003c\/p\u003e\n\u003cp\u003eIn the illustrations, cyan indicates sliding and orange indicates the pivoting movement of the straps.\u003c\/p\u003e\n\u003cdiv style=\"display: flow-root; clear: both; margin-bottom: 20px;\"\u003e\n\u003ch3\u003eCheek connector\u003c\/h3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0659\/5339\/9020\/files\/connector-backe-grenzen-final.png?v=1794827139\" alt=\"Cheek connector: two sliding straps and a vertical strap that can also pivot.\" loading=\"lazy\" style=\"float: right; width: 200px; max-width: 100%; height: auto; margin: 0 0 12px 16px;\"\u003e\n\u003cp\u003eTwo continuous straps cross here. The horizontal strap can slide left and right, and the vertical strap can slide up and down. The vertical strap can also pivot within its guide. This lets you adjust the position of the connector on your cheek and the angle of the vertical strap.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flow-root; clear: both; margin-bottom: 20px;\"\u003e\n\u003ch3\u003eForehead connector\u003c\/h3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0659\/5339\/9020\/files\/connector-stirn-01-final-1000x1000.png?v=1794827070\" alt=\"Forehead connector: three attached straps showing their possible pivot positions.\" loading=\"lazy\" style=\"float: right; width: 200px; max-width: 100%; height: auto; margin: 0 0 12px 16px;\"\u003e\n\u003cp\u003eThree straps are each secured with a screw. They can pivot around their attachment points but cannot slide lengthways there. The single upper strap has a smaller pivot range; the two side straps can be angled further outwards. This lets you adjust their path over the head and towards the sides.\u003c\/p\u003e\n\u003cp\u003eThe forehead connector should sit high enough on your forehead without pressing on the bridge of your nose. If positioned too low, it can cause uncomfortable pressure or pressure marks. Move it higher if you feel pressure in that area.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flow-root; clear: both; margin-bottom: 20px;\"\u003e\n\u003ch3\u003eRear head connector\u003c\/h3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0659\/5339\/9020\/files\/connector-hinterkopf-02-final-1000x1000.png?v=1794827069\" alt=\"Rear head connector: a vertically sliding centre strap and two pivoting side straps.\" loading=\"lazy\" style=\"float: right; width: 200px; max-width: 100%; height: auto; margin: 0 0 12px 16px;\"\u003e\n\u003cp\u003eThe vertical strap passes through a straight guide and can slide up and down. This allows the connector to be positioned along the strap. The two side straps are secured with screws and can pivot independently, letting you adjust their angle at the back of your head.\u003c\/p\u003e\n\u003cp\u003eIf the connector disc slips unintentionally, it can be secured in place using the screw hole provided in its centre. Punch a suitable hole in the vertical strap at the desired position and screw the strap to the disc. This prevents sliding along that strap while the side straps remain free to pivot.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flow-root; clear: both; margin-bottom: 20px;\"\u003e\n\u003ch3\u003eEnd connector\u003c\/h3\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0659\/5339\/9020\/files\/connector-end-01-zentriert-1000x1000.png?v=1794827114\" alt=\"End connector: an attached upper strap and a horizontally sliding strap; the lower spare slot remains free.\" loading=\"lazy\" style=\"float: right; width: 200px; max-width: 100%; height: auto; margin: 0 0 12px 16px;\"\u003e\n\u003cp\u003eThe upper strap is secured with a screw. The horizontal strap can slide left and right through the connector. This allows the position of the upper attachment point to be adjusted along the horizontal strap. The lower slot remains available as a spare.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eTogether, these connectors let you gradually adjust the strap layout to the desired position on your head. Sliding redistributes the available strap length between sections; pivoting changes the direction of the strap.\u003c\/p\u003e","brand":"silencilicone","offers":[{"title":"Black \/ Standard","offer_id":59310658060619,"sku":null,"price":139.0,"currency_code":"EUR","in_stock":true},{"title":"Neon Yellow \/ Standard","offer_id":59310658289995,"sku":null,"price":139.0,"currency_code":"EUR","in_stock":false},{"title":"Neon Orange \/ Standard","offer_id":59310658322763,"sku":null,"price":139.0,"currency_code":"EUR","in_stock":false},{"title":"Black \/ Lockable","offer_id":59311757525323,"sku":null,"price":159.0,"currency_code":"EUR","in_stock":true},{"title":"Neon Yellow \/ Lockable","offer_id":59311757558091,"sku":null,"price":159.0,"currency_code":"EUR","in_stock":false},{"title":"Neon Orange \/ Lockable","offer_id":59311757590859,"sku":null,"price":159.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/5339\/9020\/files\/Headgear-1.jpg?v=1794823477","url":"https:\/\/silencilicone.com\/en-us\/products\/headgear","provider":"silencilicone","version":"1.0","type":"link"}